Finest Bluetooth Automotive Amplifiers – NO Head Unit Wanted [2022 UPDATED]

The principle distinction between a Bluetooth amplifier and different automotive amplifiers is you could stream music immediately into it from all of your Bluetooth-enabled units.

A Bluetooth automotive amp merely guidelines out the necessity for getting a head unit saving you many bucks within the course of. The next picks are the highest available in the market by way of high quality options and sturdiness.

Automotive Bluetooth Amps We Advocate

4-Channel Decide

Kenwood KAC-M5024BT

KENWOOD KAC-M5024BT Compact...

Energy: 50 watts RMS x 4 (@4Ω, 14.4V, 20Hz-20kHz, ≤ 1.0% THD+N);
@2Ω: 75 watts RMS x 4 (@2Ω, 14.4V, 20Hz-20kHz, ≤1.0% THD);
Bridged: 150W x 2 (@4Ω, 14.4V, 20Hz-20kHz, ≤1.0% THD)
Class: D
Channels: 4

Kenwood KAC-M5024BT 4-channel amp is our bang-for-the-buck possibility due to its superior expertise and its multi-application mixed with a terrific value. Our earlier choose, the Kenwood KAC-M1824BT, has been changed by this one.

It’s not solely appropriate on your automotive however may also be put in in your bike, ATV, and boat. That is potential as a result of the amplifier is supplied with a conformal-coated important PCB which affords safety from outside moisture and salt from marine environments.

The Bluetooth connection permits you to function your music wirelessly which is far more enjoyable than utilizing RAC enter cables which may allow you to down at occasions.

Its compact dimension and water resistance properties make it actually appropriate to be used in environments the place amplifiers weren’t beforehand put in on account of lack of area and the injury brought on by publicity to environmental situations.

It’s waterproof and dustproof and comes with an IPX66/67 certification. The IPX66/67 certification permits it to carry out even when uncovered to water. This makes it appropriate to function on a ship, ATV, and bike. It’s examined for corrosion resistance towards salt spray and salt fog underneath ASTM B117.

The SMART distant controls Bluetooth on and off capabilities, quantity, skip tracks and EQ/Preout presets.

If an aftermarket unit with out preamp output is used, the amplifier’s energy wire is linked on to the facility line of the top unit. It is because this amplifier accommodates a signal-sensing turn-on function that turns your amplifier on when a sign from the unit enter is detected. This function eliminates the necessity to set up a turn-on result in the amplifier’s energy management wire.

Video Overview

5-Channel Decide

Energy Acoustik RZ5‐2500 DSP

Power Acoustik RZ5-2500D 2100W...

RMS: @ 2Ω 150W x 4 + 600W x 1;
@ 4Ω 100W x 4 + 400W x 1;
Bridged @ 4Ω 300W x 2 + 600W x 1 (2Ω)
Max: 2,500 Watts
No. of Channels: 5
Frequency Response: N/A
Dimension: 4.75” x 1.625” x 12.25”
Class: D

In the event you want extra energy with fantastic digital sound processing in your automotive, contemplate this 5-channel amp by Energy Acoustik. It could possibly energy your two pairs of low-resistance audio system with 150 watts for every. You possibly can concurrently energy a 600W sub from this Energy Acoustik powerhouse.

The auto-tuning of its DSP may be very handy. You possibly can configure it in your laptop by connecting it by way of a USB connection. Furthermore, you possibly can tune it out of your iOS and Android units on the Razor DSP app by Bluetooth connections.

You can even use its Bluetooth connectivity to get high-level enter from any BT-enabled system. Regardless of being such a strong 5-channel unit, RZ5‐2500DSP boasts a compact chassis that makes its set up simple throughout completely different automotive fashions.

4-Channel Price range

Blaupunkt AMP1804BT

BLAUPUNKT AMP1804BT Car Audio...

Energy (RMS/ Peak): 150W x4 (at 2 ohms) and 100W x4 (at 4 ohms), 1600W
No. of Channels: 4
Frequency Response: 10 Hz – 30 kHz
Dimension: 3.8” x 1.8” x 6.7”
Class: D

That is one other pocket-friendly possibility you possibly can contemplate to improve your automotive sound with a wi-fi 4-channel amp. Blaupunkt has designed this amplifier in order that it could possibly simply match into each sort of automotive trunk and may work with all kinds of stereo techniques.

We significantly like this funds amp as a result of it’s excellent for the correct quantity of sound enchancment. It neither will increase the loudness and bass reverbs an excessive amount of nor does its sound fall underwhelming.

The opposite spectacular bit about this Blaupunkt is its Bluetooth Connectivity. When many costly amps don’t have the most recent Bluetooth 5.0, Blaupunkt AMP1804BT options it regardless of being a low-priced amp possibility on the block.

Blaupunkt AMP1804BT video overview + dyno check

4-Channel Price range

Soundstream ST4.1000DB

Soundstream ST4.1000DB...

Energy (RMS/ Peak): 125W x4 (at 2 ohms);
90W x4 (at 4 ohms);
250 watts x 2 bridged at 4 ohms
Max: 1000W
No. of Channels: 4
Frequency Response: 20 Hz – 30 kHz
Dimension: 3” x 1.5” x 7.75”
Class: D

Soundstream has designed this Bluetooth amp for all these automotive homeowners who want optimum effectivity and sturdiness from the improve amplifier. Soundstream ST4.1000DB incorporates a MOSFET energy provide with IRTM transistors. Each these elements guarantee top-quality efficiency to fulfill the sound amplification necessities of any audiophile.

The amp additionally incorporates a hybrid aluminum alloy warmth sink. This dissipation channel ensures that you should use the amp nonstop with out worrying about it getting overheated. Even when the amp will get overheated, its thermal and overload circuits defend it from any injury.

You don’t have to run a distant turn-on wire whereas putting in it along with your present manufacturing unit radio— because of its intuitive hi-level sign sensing turn-on. ST4.1000DB will robotically detect the incoming sound sign and can change on/off by itself.

Soundstream ST4.1000DB video overview

High Notch 4-Channel

Large Audio TX48

Massive Audio TX48-200 Watts x...

RMS: @2 Ohm 400W x 4;
@4 Ohm 200W x 4;
@4 Ohm Bridged 800W x 2
Max: 1600 W
No. of Channels: 4
Frequency Response: 10 Hz – 25 kHz
Dimension: 4.25” x 1.6” x 10.75”
Class: D

We’re rounding out the listing with this top-quality 4-channel amp by Large Audio. It’s a kind of few Bluetooth amps that include an authorized resistance towards moisture. It’s an IP65 waterproof amplifier— because of its black anodized brushed aluminum warmth sink, nickel-plated RCA inputs, PCB with Dura-coated epoxy, and stainless-steel caps.

This spectacular development permits you to use it in automobiles in addition to ATVs, boats, and different marine autos. Even when your head unit doesn’t function CarPlay or Android Auto, you possibly can nonetheless use your cellphone as your music supply, courtesy of TX48’s Bluetooth connectivity.

This amp permits you to produce respectable sound from 4 200W audio system boasting excessive impedance. The produced sound shall be louder and clearer than what your issue setup was used to supply. We additionally like this Large audio amp for its built-in 5-way safety and noise discount circuitries.

The whole lot else we suggest

5-Channel Additionally Nice

Lanzar HTG558BT

Lanzar Amplifier Car Audio,...

RMS: 4 X 250W + 1 X 650W RMS @ 4 Ohms;
4 X 350W + 1 X 1,500W RMS @ 2 Ohms;
2 X 1,000W MAX @ 4 Ohms Bridged
Max: 4 X 500W + 1 X 2,000W MAX @ 4 Ohms
Class: AB
Channels: 5

The Lanzar HTG558BT has some outstanding options that are said and mentioned beneath. This amplifier has inbuilt Bluetooth expertise which permits customers to attach their units and stream music from any platform.

The MOSFET energy provide is an evolutionary expertise for Bluetooth automotive amplifiers. MOSFET permits an amplifier to maintain the identical required energy output at a unique voltage. Fitted with a 3-way safety circuitry that options safety from thermal, overload, and quick circuits.

This amplifier options Chrome RCA connectors between the amplifiers and audio system which guarantee distortion-free audio output. With the RCA jacks, you possibly can add one other amplifier simply through the use of the jack because the feed to the following amplifier as an alternative of utilizing splinter codes to distribute the sign to the following amplifier.

Excessive Finish

Sony XM-GS6DSP

Sony XM-GS6DSP GS Series 6/5...

RMS: @ 4 OHMS 45 W × 4 (FRONT/REAR), 90 W × 2 (SUBWOOFER);
@ 2 OHMS 175W × 2 (SUB) at 1 kHz, 600 W × 1 (SUBWOOFER bridged) at 1 kHz;
@ 4 OHMS — BTL (BRIDGE-TIED LOAD) 350 W (SUBWOOFER) at 1 kHz
Max: @4 OHMS BTL (BRIDGE-TIED LOAD) 600 W (SUB);
@ 2 OHMS 300 W × 2 (SUB), 1100 W × 1 (SUBWOOFER bridged)
Class: D
Channels: 6/5

This Sony high-end Bluetooth automotive amplifier has unmatched options that are mentioned beneath.

As a Class D amplifier, it’s compact and might be fitted in your automotive with out consuming a lot area. Class D amps are extremely environment friendly in that they produce a variety of energy with out utilizing a lot present and with out thermal overload.

It’s fitted with a Wi-fi Bluetooth connection which lets you join your units and stream your favourite music.

Sony XM-GS6DSP offers you distant management by Sony’s Music Centre software which is put in in your units. By this function, you possibly can modify fader, your speaker ranges, time alignment (optimizes sound for every seat), and a 10-band equalizer till it fits your personalised necessities.

The 6 channels accessible on this amp (see 8-channel choices) are usually configured as follows. Channels 1 & 2 energy tweeters, midranges or entrance speaks; Channels 3 & 4 energy the woofers or the midranges; channels 5 & 6 might be bridged to run the subwoofer or can run in stereo to energy the woofers.

It has a 3-way protecting circuitry that turns off the amplifier when overheating, overloading, quick circuit or DC Offset happens.

It has a low enhance circuitry for the subwoofer channel which may enhance bass response.

Sony XM-GS6DSP is one of some amplifiers with as much as 6 channels that work completely fantastic with no music distortions. It’s considered one of a form amplifier and you need to completely test it out.

4-Channel Price range

Velex VX-505

Marine Bluetooth Amplifier...

Energy (RMS/ Peak): 60W x4 (at 4 ohms), 800W
No. of Channels: 4
Frequency Response: 20 Hz – 20 kHz
Dimension: 4” x 2” x 7.8”
Class: D

Discovering a weather-resistant Bluetooth 4-channel amp with out straining your funds is like discovering a needle in a haystack. Nevertheless, in case you are trying in the best path, you will discover one. Living proof: Velex VX-505. It’s an 800W weather-resistant amp that’s designed and constructed to face up to all kinds of tough and difficult outside situations.

Its PCB (circuit board) is conformal-coated, making it impervious to mud and moisture. Furthermore, its general {hardware} is fabricated from stainless-steel, making it totally corrosion-resistant. Any such high quality development additionally makes it an appropriate possibility for ATVs and marine autos.

You should utilize this amp to energy two pairs of high quality high-impedance audio system with 60 watts. Having 4 60W audio system powered by an amp that allows you to join wi-fi enter is actually a terrific enchancment to any previous inventory stereo setup.

4-Channel Price range

Pyle PLMRMB4CB

Pyle Auto 4-Channel Marine...

Energy (RMS/ Peak): 300W x4 (at 2 ohms) and 200W x4 (at 4 ohms), 2000W
No. of Channels: 4
Frequency Response: 10 Hz – 40 kHz
Dimension: 3.4” x 1.4” x 4.1”
Class: AB

It is a compact and funds Bluetooth 4-channel amp appropriate for each street autos and marine installations. Its outer and inside development is completed to make it make exceedingly good towards publicity to excessive moisture. Its low value makes its versatile use even higher.

This Pyle Auto 4-Channel amp can also be nice due to its ease of use and set up. Its Bluetooth 2.0 permits you to use it with all kinds of BT-enabled units. Furthermore, its small footprint with built-in RCA cables makes its set up a breeze.

If you wish to improve your manufacturing unit sound with out breaking the financial institution, you need to contemplate this Pyle amplifier. Its marine-grade development and wi-fi music streaming simply additional sweeten the deal.

4-Channel Additionally Nice

Kicker 42PXI BT1002

Kicker PXIBT100.2-2x50-Watt...

Energy (RMS/ Peak): 50W x4 (at 2 ohms) and 25W x4 (at 4 ohms), 200W
No. of Channels: 4
Frequency Response: 20 Hz – 20 kHz
Dimension: 3.43” x 1.625” x 7.17”
Class: D

If you’re not chasing a really highly effective amp however want one thing that may present you good sound and change your wonky manufacturing unit head unit, contemplate this 4-channel amp by Kicker. The amp affords cheap energy output for 4 low-impedance audio system and subs. In the event you want common sound, you may also plug it into high-impedance sound outputs.

The very best factor about this Kicker amp is its Bluetooth connectivity, helpful show, and distant. Other than Bluetooth, you possibly can join all of your handheld units to the amp by USB and aux connections as effectively.

This Kicker amp can also be a great funding on account of its refined sound. Its selectable crossover together with a subsonic filter ensures you could hear the meticulous sound you anticipate any top-of-the-line amp to supply.

Price range

BOSS Audio MC900B

BOSS Audio Systems MC900B...

RMS: 94 Watts x 4 RMS @4-Ohms
Max: 500 Watts @4-Ohms Max Energy
Class: AB
Channels: 4

If you’re on a decent funds otherwise you wish to spend as little as potential and nonetheless have a terrific Bluetooth amplifier on your automotive, the Boss MC900B will certainly do the trick.

Wherever you go the MC900B shall be there to brighten your day with its Class AB amplification options. MC900B is an all-terrain amp that means it could possibly stand up to exterior environmental publicity.

MC900B has aptX decoding put in which improves the standard of compressed music recordsdata saved in your units.

The amp has Safety circuitry which turns it off in case a brief circuit or thermal overload happens. This fixed monitoring of the situations of your system retains the amplifier and your complete automotive system protected.

In fact, it has a wi-fi Bluetooth connection that enables one system to attach and stream music out of your favourite apps.

Bluetooth automotive amplifier FAQ

How do I add Bluetooth to the automotive amplifier?

Whereas getting a Bluetooth amplifier is way simpler and simpler, you possibly can add Bluetooth to your automotive amplifier. First, select a Bluetooth audio adapter like this one. Then, you’ll have to join the units utilizing the RCA cables. Lastly, use the pairing methodology specified by the adapter’s producer to pair the units and also you’re good to go.

What does a Bluetooth automotive amplifier do?

The Bluetooth automotive amplifier permits you to join the amplifier to any Bluetooth system (cellphone, pill, and many others.). This eliminates the necessity to buy a further automotive stereo receiver.

Are Bluetooth amplifiers any good?

Most customers will say they’re. Not solely due to wi-fi streaming, but in addition as a result of they’re simple to arrange, join, and function.

Final replace on 2022-12-08 / Affiliate hyperlinks / *Picture Disclaimer: We use photos/knowledge from Amazon Product Promoting API solely on merchandise that hyperlink to Amazon. On merchandise with the “Value at Crutchfield” button, we use photos/knowledge from Crutchfield.com as per the partnership deal.